UI-VIEW SETUP FOR FILL-IN DIGI AND FULL DIGI

Here is what is required to setup UI-View32 to run as a "New Paradigm" digi. Two configurations are presented, one for a "fill in" digi that would only respond to WIDE1-1, and one for a full WIDEn-N digi.

Setting up UI-View32 to act as a FILL-IN Digi.

You must be running your TNC in KISS mode to enable the digipeater in UI-View32.

Go to Setup -> Digipeater Setup
Enable Digi is checked
UI Only is checked
Alias substitution is checked
WIDEn-n is not checked
TRACEn-n is not checked
Alias(es) has AC7TK,WIDE1-1 <substitute your callsign for mine>
Sub Alias has AC7TK <substitute your callsign for mine>
Dupe secs = 30
Digi routes has 1=1

Click on OK and you're done.

Setting up UI-View32 to act as a full WIDEn-N Digi.

You must be running your TNC in KISS mode to enable the digipeater in
UI-View32.

This involves opening up a text file, editing it and saving it. I recommend
that you first save a copy of the original file so if something happens you
can easily revert back.

Open the UIVIEW32.INI file (located in C:\Program Files\Peak
Systems\UI-View32\) scroll down to the section named [DIGI_OPTIONS] and set
it to match this:

[DIGI_OPTIONS]
DIGI_ENABLED=TRUE
UI_ONLY=TRUE
ALIAS_SUBSTITUTION=TRUE
DUPE_SUPPESS_SECONDS=30
ALIAS=WIDE6-6,WIDE6-5,WIDE6-4,WIDE6-3,WIDE6-2,WIDE6-1,WIDE5-5,WIDE5-4,WIDE5-
3,WIDE5-2,WIDE5-1,WIDE4-4,WIDE4-3,WIDE4-2,WIDE4-1,AC7TK <substitute your
callsign for mine here>
UIFLOOD=OR <enables ORn-N paths in Oregon, substitute your state or
province>
UITRACE=WIDE
WIDEN-N=TRUE
TRACEN-N=TRUE
SUBST_ALIAS=AC7TK <substitute your callsign for mine here>
EXCLUDED=""
[DIGI_ROUTES]
1=1

And in the UI-View32 program:
Setup -> Station Setup: Beacon comment:PHG5110/Wn,ORn/Eugene <substitute
your actual PHG and City here>
Setup -> Station Setup: Symbol:No.Digi O'ly:S

Info provided by Ron/AC7TK in Eugene, OR

THANKS RON !!!